70-1722
INSTRUCTIONS
FOR AMPLIFIED SOUND
SYSTEMS
70-1722
INSTRUCTIONS
FOR AMPLIFIED SOUND
SYSTEMS
70-1722
INSTRUCTIONS
FOR AMPLIFIED SOUND
SYSTEMS
70-1722
INSTRUCTIONS
FOR AMPLIFIED SOUND
SYSTEMS
For vehicles with factory amplifiers:
In order to turn on the factory amplifier you
must locate the 20-way harness that was
plugged into the factory radio. In pin 16 in
vehicles without navigation or pin 20 in
vehicles with navigation (see diagram on
reverse side) there is a Light Blue wire that
you must attach to the Amp Turn On wire of
the aftermarket radio for the amplifier to
turn on.
For vehicles with factory amplifiers:
In order to turn on the factory amplifier you
must locate the 20-way harness that was
plugged into the factory radio. In pin 16 in
vehicles without navigation or pin 20 in
vehicles with navigation (see diagram on
reverse side) there is a Light Blue wire that
you must attach to the Amp Turn On wire of
the aftermarket radio for the amplifier to
turn on.
For vehicles with factory amplifiers:
In order to turn on the factory amplifier you
must locate the 20-way harness that was
plugged into the factory radio. In pin 16 in
vehicles without navigation or pin 20 in
vehicles with navigation (see diagram on
reverse side) there is a Light Blue wire that
you must attach to the Amp Turn On wire of
the aftermarket radio for the amplifier to
turn on.
For vehicles with factory amplifiers:
In order to turn on the factory amplifier you
must locate the 20-way harness that was
plugged into the factory radio. In pin 16 in
vehicles without navigation or pin 20 in
vehicles with navigation (see diagram on
reverse side) there is a Light Blue wire that
you must attach to the Amp Turn On wire of
the aftermarket radio for the amplifier to
turn on.
Use Metra’s standard wiring instructions for
Use Metra’s standard wiring instructions for
Use Metra’s standard wiring instructions for
Use Metra’s standard wiring instructions for
the remainder of the installation.
(See harness diagram on back of page)
REV. 06/08/06 INST70-1722
the remainder of the installation.
(See harness diagram on back of page)
REV. 06/08/06 INST70-1722
the remainder of the installation.
(See harness diagram on back of page)
REV. 06/08/06 INST70-1722
the remainder of the installation.
(See harness diagram on back of page)
REV. 06/08/06 INST70-1722
70-1722
INSTRUCTIONS
FOR AMPLIFIED SOUND
SYSTEMS
70-1722
INSTRUCTIONS
FOR AMPLIFIED SOUND
SYSTEMS
70-1722
INSTRUCTIONS
FOR AMPLIFIED SOUND
SYSTEMS
70-1722
INSTRUCTIONS
FOR AMPLIFIED SOUND
SYSTEMS
For vehicles with factory amplifiers:
In order to turn on the factory amplifier you
must locate the 20-way harness that was
plugged into the factory radio. In pin 16 in
vehicles without navigation or pin 20 in
vehicles with navigation (see diagram on
reverse side) there is a Light Blue wire that
you must attach to the Amp Turn On wire of
the aftermarket radio for the amplifier to
turn on.
For vehicles with factory amplifiers:
In order to turn on the factory amplifier you
must locate the 20-way harness that was
plugged into the factory radio. In pin 16 in
vehicles without navigation or pin 20 in
vehicles with navigation (see diagram on
reverse side) there is a Light Blue wire that
you must attach to the Amp Turn On wire of
the aftermarket radio for the amplifier to
turn on.
For vehicles with factory amplifiers:
In order to turn on the factory amplifier you
must locate the 20-way harness that was
plugged into the factory radio. In pin 16 in
vehicles without navigation or pin 20 in
vehicles with navigation (see diagram on
reverse side) there is a Light Blue wire that
you must attach to the Amp Turn On wire of
the aftermarket radio for the amplifier to
turn on.
For vehicles with factory amplifiers:
In order to turn on the factory amplifier you
must locate the 20-way harness that was
plugged into the factory radio. In pin 16 in
vehicles without navigation or pin 20 in
vehicles with navigation (see diagram on
reverse side) there is a Light Blue wire that
you must attach to the Amp Turn On wire of
the aftermarket radio for the amplifier to
turn on.
Use Metra’s standard wiring instructions for
Use Metra’s standard wiring instructions for
Use Metra’s standard wiring instructions for
Use Metra’s standard wiring instructions for
the remainder of the installation.
(See harness diagram on back of page)
REV. 06/08/06 INST70-1722
the remainder of the installation.
(See harness diagram on back of page)
REV. 06/08/06 INST70-1722
the remainder of the installation.
(See harness diagram on back of page)
REV. 06/08/06 INST70-1722
the remainder of the installation.
(See harness diagram on back of page)
REV. 06/08/06 INST70-1722
|
KWC Indoor Furnishings K26VB5770038 User Manual
KWC Indoor Furnishings S10X108 User Manual
Kyocera Cell Phone KX444 User Manual
LG Electronics Double Oven LDG3011ST User Manual
Lincoln Electric Welding System IM822 User Manual
Lindy Computer Accessories 42791 User Manual
Linear Welder 3015 User Manual
Makita Impact Driver 6909D User Manual
Memorex Flat Panel Television DT1900 C User Manual
Midland Radio Two Way Radio GXT 250 User Manual