PSC Microphone SGM1 User Manual

Professional Sound Corporation  
DV Audio SGM1 Microphone Kit  
The PSC SGM1 Microphone Kit Contains:  
SGM1 Microphone  
Foam Windscreen  
Koala tm MiniMax High Wind Fur Cover  
Special SGM1 Shockmount  
Offset, Highrise Camera Shoe Adapter  
Boom Pole Adapter  
 
Instructions for using the Shock Mount:  
1.  
The SGM1 Microphone must be properly threaded through the silicone bands.  
Please see photo for proper band placement around the microphone:  
Note how SGM1 Microphone is threaded through the silicone bands  
2.  
3.  
Install the foam windscreen for all outdoor use and for indoor use where air-  
conditioning rumble may be a problem.  
Install the Koala MiniMax tm High Wind Fur Cover when working outdoors in high  
wind conditions. To install the Koala MiniMax Cover, carefully pull it over the  
foam windscreen. Secure with the attached Velcro straps.  
4.  
To change from one adapter to another simply remove the thumbscrew located  
on the base of the shock mount and replace the adapter with the other style. Be  
sure to include the rubber washer between the shock mount body and the  
adapter. This same thumbscrew can be used to tilt the microphone up or down  
on it’s axis. Simply loosen the thumbscrew and reposition the microphone to  
your desired position and then re-tighten the thumbscrew.  
 
SPECIFICATIONS:  
Size:  
0.750” x 7.9”  
(19mm x 200mm)  
Supply Current:  
Pick-up Pattern:  
Freq. Response:  
Output Impedance:  
Max SPL:  
<3mA  
Weight:  
2.7oz  
(76.7gm)  
Hyper-Cardioid  
50 to 18Khz  
50 Ohms  
Case Material: Brass  
Finish:  
Power:  
Black Matte Paint  
48PH to Din Specs  
115dB  
Capsule Type:(2x) 12mm Electrete  
Warranty:  
1 year, Limited  
Limited Warranty  
Professional Sound Corporation warrants the DV SGM1 Microphone to be free of defective  
material and workmanship for a period of one year from the original date of purchase and  
agrees to repair or replace such defective parts or the whole product at it’s option,  
provided that the equipment is returned to Professional Sound Corporation. Shipping and  
insurance costs to and from Professional Sound Corporation must be prepaid by the  
owner. This warranty does not cover damage due to accident, careless handling, abuse or  
misuse, improper connection and/or installation, improper electrical contact or grounding.  
This warranty will be null and void in the event of removal, alteration or tampering with the  
product case seal, or by service or repair work not performed by Professional Sound  
Corporation. Proof of purchase date (copy of invoice or Warranty Certificate) must be  
furnished before warranty service will be performed. This warranty is in lieu of any other  
warranty, expressed or implied, including warranties without limitation, products being  
merchantable at the time of purchase or suitable for a particular purpose. This warranty  
does not extend to, or include consequential damage.  
In order to validate this warranty, the attached Professional Sound Corporation Warranty  
Card must be filled out completely and mailed to the printed address within 14 days form  
the date of delivery.  
Professional Sound Corporation  
28085 Smyth Drive  
Valencia, Ca 91355 USA  
Ph 661-295-9395  
Fax 661-295-8398  
 
CE  
DECLARATION OF CONFORMITY  
EMC:  
LVD:  
This product is in compliance with the  
Electromagnetic Compatibility Directive, 89/336/EEC  
as defined in EN 50081-1, EN55022 and EN 50082-1.  
IEC801-2, IEC801-3 and IEC801-4.  
This product is in compliance with the requirements of  
the Low Voltage Directive, 73/23/EEC. 93/68/EEC as  
defined in EN60065, 1993 and/or EN60950/A1/A2/A3:  
1995  
TRADE NAME:  
MODEL:  
PSC, DV AUDIO  
DV SGM1 Microphone  
RESPONSIBLE PARTY:  
Professional Sound Corp.  
28085 Smyth Drive  
Valencia, CA 91355 USA  
CONTACT PERSON:  
Ronald Meyer  
(661) 295-9395  
TYPE OF PRODUCT:  
MANUFACTURER:  
Microphone  
Professional Sound Corp.  
28085 Smyth Drive  
Valencia, CA 91355 USA  
We hereby declare that the equipment bearing the trade name and model number  
listed above has been tested in accordance with the requirements contained in the  
above listed directives. All necessary steps have been taken and are in force to  
assure that production units manufactured will conform to Directive guidelines.  
August 2005  
Professional Sound Corporation.  
 

Philips Air Cleaner AC4064 00 User Manual
Philips Car Speaker VOIP080 User Manual
Philips Stereo Receiver SL50i User Manual
Philips Universal Remote SBC RU 510 00U User Manual
Philips Universal Remote SRU4208WM User Manual
Planet Technology Network Card IPX 300 Series User Manual
Precisionaire Air Cleaner PB100 0507 User Manual
Precor Cross Country Skier 515e User Manual
PVI Industries Water Heater 20 N 125A MXS User Manual
PYLE Audio Flat Panel Television PLVSMN5 User Manual